Replacement cartridge for tap mixer diameter 42 Hydroplast C42
Advantages:
PAYMENTS:
Order also by phone
LUN - DOM 9 AM - 20 PM
Replacement cartridge for mixers Diameter 42 Hydroplast C42
HYDROPLAST Original Replacement
Features
Ceramic disc cartridge with square brass handle pin.
High coupling at the base with a single pin.
Measurements: Diameter mm.42 Total height from the stem mm.61.3
Installation tips
To ensure the best functioning and long life of the cartridge:
the seat of the tap: must be clean and free of incrustations, avoid grease, oil, paint and solvents
the hole in the tightening nut must be approximately 0.20 mm larger than the diameter of the cartridge collar
tightening: the ring nut must screw freely but without play and rest on the entire surface of the cartridge. Tighten with a torque of 1 ÷ 1.2 Kgm (10 ÷ 12 Nm) to avoid unnecessary overloads and ensure greater smoothness of operation
test: during tests without water, avoid repeated and improper activations. Avoid unnatural overloads on the lever even during packaging, transport and installation
installation: hot water temperature max 80°C, recommended 60-65°C. Supply pressure min. 0.1 bar, max 5 bar continuous, max 10 bar
occasional. Pressure difference between hot and cold water: recommended the minimum possible (max 1.5 bar).
We recommend mounting filters on the water inlets.
Angelo B. published the 10/02/2024 following an order made on 07/01/2024
La cartuccia è ok, ma quella acquistata l'ultima volta è durata un solo anno, pazienza.
Francesco A. published the 21/08/2023 following an order made on 17/07/2023
Ottimo prodotto.
Angelo B. published the 30/11/2022 following an order made on 07/11/2022
Ok per rapporto qualità/prezzo. Purtroppo però, trattandosi di una cartuccia a dischi ceramici, sarebbe stato opportuno un po' di imballaggio, invece assolutamente nulla!
Anonymous customer published the 30/09/2021 following an order made on 15/09/2021
Prodotto originale, altissima qualità e robustezza.