Electronic tap for cold or pre-mixed water Thermomat RUELDA01

Electronic tap for cold or premixed water Thermomat RUELDA01

Electronic tap with photocell activation. Ideal for both private and community environments and for the disabled, electronic taps allow considerable water savings and greater hygiene compared to traditional and timed taps. Power supply via battery box for 4 AA batteries or transformer, both supplied; batteries not supplied. The sensors are designed to prevent the taps from being blocked in the open position (anti-waste-anti-flooding function) and have a maximum operating time of 50 seconds; if the sensor is covered for more than 50 seconds, the water switches off automatically. Any obstacles must be removed to restore normal operations.

TECHNICAL DATA:

Electronic tap for cold or premixed water, with double battery power supply and 6V transformer. (batteries not included)

Product control: Infrared technology

Installation: Washbasin mounting Hot water inlet temperature: Maximum 70 ° C

Operating pressure: from 0.5 to 6 bar With pressures higher than 6 bar, use a pressure reducer

Power supply specifications: Power supply system: 6 V battery or 6 V transformer

Maximum supply time (vandal-proof safety time): 60 seconds

Activation delay: 0.5 sec. Activation distance set at the factory: 120 - 180 mm

Battery life: about 110,000 cycles Battery / transformer box electrical connection: use the supplied power supply

Solenoid valve electrical connection: use the supplied element. Solenoid valve hydraulic connection: ½ "G male connections

Water inlet connection: flexible stainless steel braid with ½ ”G female swivel Support base: Ø 55 mm

Electronic tap for cold water or pre-mixed water, with double power source, battery and transformer 6V. (batteries not included )