4 wired thermo-electric actuator with auxiliary micro FAR 1924

4 wired thermo-electric actuator with auxiliary micro FAR 1924

The thermoelectric actuator can be used in association with both thermostatic valves and thermoelectric manifolds. It permits automatic opening and closing of all units to which it is interconnected in response to an electrical signal. When the thermostat or control unit - to which the thermoelectric actuator is connected transmits a signal, the inner element is electrically heated, thus fully opening (NO) or closing (NC) - To install the actuator onto the valve, remove the handle, the plastic support and screw on the adapter Art. 1941 (Illustration 1). - To carry out installation at the manifold, remove the handle and screw the ring directly onto the blue adapter (Illustration 2). 1. DESCRIPTION 2. INSTALLATION THERMOELECTRIC ACTUATORS the valve. The position can be identified by means of the cylindrical position indicator on the actuator head.

Product description:

4 wired thermo-electric actuator with auxiliary micro-switch and selector.

Suitable for installation on thermostatic valves and manifolds.

NC = NORMALLY CLOSED

N.B. For installation on thermostatic valves, use the chrome-plated adapter, art. 1941.