- -30%
1/2” thermostatic cartridge threaded head Thermomat TCRT12AVVFV
Advantages:
PAYMENTS:
Order also by phone
LUN - DOM 9 AM - 20 PM
1/2” thermostatic cartridge threaded head Thermomat TCRT12AVVFV
½” Thermostatic cartridge with locking by threaded head. This pullout device includes all the thermostatic mixer’s functional components. THERMOMAT cartridge is locked to the body of the mixer by means of a stainless steel pin (pat.) or a radial grub screw which also determines its correct timing; it is factory tested and calibrated. It is possible to disassemble and re-assemble it without removing the knob, therefore, in case it is necessary to clean the filters, it can be disassembled without the need to re-calibrate it. It can be applied to exposed mixers for showers, bathtubs, washbasins, bidets and, of course, to all the built-in mixers. A safety system allows water to exceed 38°C only by pressing a specific button. Art. TCRT12AVVFV does not include temperature scaled knob. Art. TCRT12AVVFV does not include temperature scaled knob. Art. TCRT12AVVFVVC
TECHNICAL DETAILS:
Maximum pressure (static): 1.000 kPa (10 bar)
Working pressure (dynamic): 100÷500 kPa (1÷5 bar)
Maximum inlet temperature: 85°C
Recommended temperature for energy saving: 60°C
Adjustment range: 15÷65°C
Knob safety block: 38°C
Maximum hot water inlet temperature: 65°C
Maximum cold water inlet temperature: 15°C
Minimum pressure: 50 kPa (0,5 bar)
Minimum flow rate: 5 l/min